The Synapse lithium iron phosphate battery can be used to reliably provide power for various types of equipment and systems. It is especially suitable for applications with high power, limited installation space and long cycle life.
It has a built-in BMS (battery management system), which can manage and monitor cells
information including voltage, current and temperature. What’s more, the BMS can balance cells
during charging and discharging to extend cycle life.
Multiple batteries can be connected in parallel to expand capacity and power, supporting longer autonomy requirements.
The whole module is non-toxic, non-polluting and environmentally friendly;
Cathode material is made from LiFePO4 with safety performance and long cycle life;
Battery management system (BMS)has protection functions including over-discharge, over-charge, over-current and high/low temperature;
The system can automatically manage charge and discharge state and balance current and voltage of each cell;
Flexible configuration, multiple battery modules can be in parallel for expanding capacity and power
Adopted self-cooling mode rapidly reduced system entire noise;
The module has less self-discharge, up to 6 months without charging it on shelf, no memory effect, excellent performance of shallow charge and discharge;
Working temperature range is from -10 to 50 , (Charging 0~50 ; discharging -10~50 ) with excellent discharge performance and cycle life;
Small size and light weight, standard of 19-inch embedded designed module is comfortable for installation and maintenance;
The Synapse 7.2M+ is a high power, full featured off-grid inverter. These inverters are equipped with a unique operating system, dual MPPTs for solar applications and the ability to operate in parallel for higher power or 3 phase applications.
In addition, there is an AC input that will allow your load to be powered by the grid when necessary and your battery bank to be charged by a grid or generator connection.
These units are not capable of feeding back into the grid. Perfect for a start-up system to reduce the effects of load shedding.
Pure Sine wave inverter
Battery equalization function to optimize battery performance
Assembled with an internal anti-dust kit for harsh environments.
Rated Power: 7200W
Voltage: 230V AC
Surge Power: 15000VA
Transfer Time: 20ms for home appliances
Waveform: Pure sine wave
Battery Voltage: 48V DC
Floating charge Voltage: 54V DC
Overcharge Protection: 66V DC
Important Note: When using this inverter with Lithium batteries, care should be taken to correctly size the bank, taking into account the maximum current which this inverter requires VS what the battery can deliver. Maximum continuous current per inverter = +-160A, max. peak current = +-320A (depending on battery SOC / terminal voltage).
Solar Charger & AC Charger:
Max PV Array Power: 2 x 4000W
Max PV Array VOC: 500V DC
MPPT Range @ Operating Voltage: 90 ~ 450V DC
Max Solar Charger Current: 80A
Max AC Charger: 80A
Max total Charge: 80A
Parallel operation: Up to 6 units
Battery BMS compatibility: Pylontech, Soltaro, WECO
Dimensions(D x W x H): 147.4 x 432.5 x 553.6mm
Communication Interface: USB / RS232 / RS485 / Wifi / Dry-contact
Relative Humidity: 5% to 95% (Non-condensing)
Operating temperature:-10°C to 50°C
Storage Temperature: -15°C to 60°C