Shop
-
Atlas 10 Liter Gas Geyser – Low Pressure Start
For indoor and outdoor use
Features:
– gas type: Lpg
– rated pressure: 2.8kpa
– heat load: 16kw
– suitable water pressure: 0.015 – 0.5mpa
– gas consumption: 0.88kg/h
– power supply: 2 x 1.5v Duracell batteries
– LCD temperature display
– water and temperature control
– gas tankless water heater
– hot water on demandSOLD OUT Atlas 12 Liter Gas Geyser – Low Pressure Start
For indoor and outdoor use
Features:
– gas type: Lpg
– rated pressure: 2.8kpa
– heat load: 24kw
– suitable water pressure: 0.015 – 0.5mpa
– gas consumption: 1.78kg/h
– power supply: 2 x 1.5v Duracell batteries
– LCD temperature display
– water and temperature control
– gas tankless water heater
– hot water on demand Atlas 16 Liter Gas Geyser – Low Pressure Start
For indoor and outdoor use
Features:
– gas type: Lpg
– rated pressure: 2.8kpa
– heat load: 32kw
– suitable water pressure: 0.015 – 0.5mpa
– gas consumption: 0.88kg/h
– power supply: 2 x 1.5v Duracell batteries
– LCD temperature display
– water and temperature control
– gas tankless water heater
– hot water on demand Atlas 20 Liter Gas Geyser – Low Pressure Start
For indoor and outdoor use
Features:
– gas type: Lpg
– rated pressure: 2.8kpa
– heat load: 40kw
– suitable water pressure: 0.015 – 0.5mpa
– gas consumption: 0.88kg/h
– power supply: 2 x 1.5v Duracell batteries
– LCD temperature display
– water and temperature control
– gas tankless water heater
– hot water on demand Atlas 6 Liter Gas Geyser – Low Pressure Start
For indoor and outdoor use
Features:
– gas type: Lpg
– rated pressure: 2.8kpa
– heat load: 12kw
– suitable water pressure: 0.015 – 0.5mpa
– gas consumption: 0.88kg/h
– power supply: 2 x 1.5v Duracell batteries
– LCD temperature display
– water and temperature control
– gas tankless water heater
– hot water on demandBoetmann Solar Borehole / Submersible Pump – 210W 80m
The HRI solar borehole range are manufactured with a permanent magnet, brush-less motor technology that generates better efficiency and performance. This product is ideal for application in remote arid areas with limited or unreliable power supply. The compact and lightweight design, ensures that these units are suitable for mobile applications.
Features:
Permanent magnet, brush-less motor, saving energy and offering maximum efficiency.
NSK bearing with alloy mechanical seal.
Intelligent water shortage protection.
MPPT function offers higher utilization rate of solar energy.
Automatic Stop | Start.
Soft start protection.
Over current protection.
Max Water Submersion Depth : 50m
Max Flow: 1600L/h
Max Head: 75m
Pump Isolation IP68
Motor Speed 500 – 4000rpm
Discharge 20mm
Power 210 watt
Voltage DC24Water Delivery litre per hour @ head hight:
0m – 1600l/h
18m – 1500l/h
30m – 1250l/h
43m – 1000l/h
55m – 750l/h
65m – 500l/h
75m – 250l/h
Boetmann Solar Borehole / Submersible Pump – 300W 100m
The HRI solar borehole range are manufactured with a permanent magnet, brush-less motor technology that generates better efficiency and performance. This product is ideal for application in remote arid areas with limited or unreliable power supply. The compact and lightweight design, ensures that these units are suitable for mobile applications.
Features:
Permanent magnet, brush-less motor, saving energy and offering maximum efficiency.
NSK bearing with alloy mechanical seal.
Intelligent water shortage protection.
MPPT function offers higher utilization rate of solar energy.
Automatic Stop | Start.
Soft start protection.
Over current protection.
Max Water Submersion Depth : 50m
Max Flow: 1600L/h
Max Head: 95m
Pump Isolation IP68
Motor Speed 500 – 4000rpm
Discharge 20mm
Power 300 watt
Voltage DC48Water Delivery litre per hour @ head hight:
0m – 1600l/h
27m – 1500l/h
45m – 1250l/h
65m – 1000l/h
78m – 750l/h
85m – 500l/h
95m – 250l/h
Boetmann Solar Borehole / Submersible Pump – 500W 120m
The HRI solar borehole range are manufactured with a permanent magnet, brush-less motor technology that generates better efficiency and performance. This product is ideal for application in remote arid areas with limited or unreliable power supply. The compact and lightweight design, ensures that these units are suitable for mobile applications.
Features:
Permanent magnet, brush-less motor, saving energy and offering maximum efficiency.
NSK bearing with alloy mechanical seal.
Intelligent water shortage protection.
MPPT function offers higher utilization rate of solar energy.
Automatic Stop | Start.
Soft start protection.
Over current protection.
Max Water Submersion Depth : 50m
Max Flow: 1600L/h
Max Head: 110m
Pump Isolation IP68
Motor Speed 500 – 4000rpm
Discharge 20mm
Power 500 watt
Voltage DC48Water Delivery litre per hour @ head hight:
0m – 1600l/h
30m – 1500l/h
60m – 1250l/h
75m – 1000l/h
90m – 750l/h
105m – 500l/h
110m – 250l/h Boetmann Solar Borehole / Submersible Pump 1200W 180m – S/Steel
The HR solar borehole range are manufactured with a permanent magnet, brush-less motor technology that generates better efficiency and performance. This product is ideal for application in remote arid areas with limited or unreliable power supply. The compact and lightweight design, ensures that these units are suitable for mobile applications.
Features:
Permanent magnet, brush-less motor, saving energy and offering maximum efficiency.
NSK bearing with alloy mechanical seal.
Intelligent water shortage protection.
MPPT function offers higher utilization rate of solar energy.
Automatic Stop | Start.
Soft start protection.
Over current protection.
Max Water Submersion Depth : 50m
Max Flow: 1600L/h
Max Head: 168m
Pump Isolation IP68
Motor Speed 500 – 4000rpm
Discharge 20mm
Power 1200 watt
Voltage DC72Water Delivery litre per hour @ head hight:
0m – 1600l/h
85m – 1500l/h
110m – 1250l/h
130m – 1000l/h
145m – 750l/h
155m – 500l/h
168m – 250l/h Boetmann VSD Pressure Pump 0.75kW
Features & Benefits:
Easy to operate
Low noise level
Automatic start/stop function
Pre-wired with a 3-point plugEnergy-efficient: Up to 80% more energy savings compared to traditional pump systems
Restart delay An integral time delay for restart after 3 seconds protects the motor from heat build-up due to continuous on/off switching
Auto-rotation A built-in timer will automatically start the pump within a pre-selected cycle to rotate the bearings
Constant pressure A pressure transducer ensures that constant pressure is maintained even when multiple water outlets are used simultaneously
Class leading efficiencyThe unit has the following integrated functions for protection from:
Dry run
Over-current
Over/under voltage
Overload
Abnormal PressureMax Flow: 4400 l/h
Max Pressure: 4.5 Bar Boetmann VSD Pressure Pump 1.5kW
Features & Benefits:
Easy to operate
Low noise level
Automatic start/stop function
Pre-wired with a 3-point plugEnergy-efficient: Up to 80% more energy savings compared to traditional pump systems
Restart delay An integral time delay for restart after 3 seconds protects the motor from heat build-up due to continuous on/off switching
Auto-rotation A built-in timer will automatically start the pump within a pre-selected cycle to rotate the bearings
Constant pressure A pressure transducer ensures that constant pressure is maintained even when multiple water outlets are used simultaneously
Class leading efficiencyThe unit has the following integrated functions for protection from:
Dry run
Over-current
Over/under voltage
Overload
Abnormal PressureMax Flow: 6500 l/h
Max Pressure: 6 Bar
Cadac 4 Burner Gas Hob
Stainless steel gas hob with 4 gas plates
Cast iron pot stands
Flame failure safety valves
Battery powered self igniter (uses D cell)
4 plastic side knobs
Rubber feet for on counter use
Requires a hose and regulator to operate (not included)
Cadac 5 Burner Gas Hob
Stainless steel gas hob with 5 gas plates
Cast iron pot stands
Flame failure safety valves
Battery powered self igniter (uses D cell)
5 plastic front knobs
Requires a hose and regulator to operate (not included) Cascade Vertical Pressure Tank 2L
Tank to be used as replacement part on VSD Pumps.
The vessel ensures the pump can switch off if there are small leaks on the system.
The air pressure must be maintained at 60% of set water pressure to ensure correct operation. Cascade VSD Pressure Pump S/S 0.75kW
Easy to set VSD, that ensures a constant pressure by regulating the speed of the motor as the demand varies.
Dry run protection included.
Can save energy from 20% to 50%.
Water pressure constant: By supplying constant water pressure, this prolongs the service life of the pipe network.
Easy installation: it can be accustomed to various environments and pump installations.
Simple operation: Fool-style operation, all functions can be finished by a button, no need for any professional staff to troubleshoot.
Motor soft start: improving power factor and prolonging the service life of the water pump.
Wide voltage range: the pump can work stably when the voltage range is 160V-250V.
Highly integrated design: combining the inverter system, control, protection, cooling and sensor system.
Cascade VSD Pressure Pump S/S 2.2kW
Easy to set VSD, that ensures a constant pressure by regulating the speed of the motor as the demand varies.
Dry run protection included.
Can save energy from 20% to 50%.
Water pressure constant: By supplying constant water pressure, this prolongs the service life of the pipe network.
Easy installation: it can be accustomed to various environments and pump installations.
Simple operation: Fool-style operation, all functions can be finished by a button, no need for any professional staff to troubleshoot.
Motor soft start: improving power factor and prolonging the service life of the water pump.
Wide voltage range: the pump can work stably when the voltage range is 160V-250V.
Highly integrated design: combining the inverter system, control, protection, cooling and sensor system.
CRI 0.37kW 60m Borehole Pump Kit – 230V
The Kit Consists of the following:
Pump & Motor 0.37kW
Control Box 0.37kW
Safety Rope – 60m
Cable – 60m
Base PlateWill deliver as follows:
63m – 1000 lt/hour
53m – 1500 lt/hour
46m – 1800 lt/hour
40m – 2000 lt/hourCRI 0.55kW 60m Borehole Pump Kit – 230V
The Kit Consists of the following:
Pump & Motor 0.55kW
Control Box 0.55kW
Safety Rope – 60m
Cable – 60m
Base PlateWill deliver as follows:
63m – 1000lt/hour
60m – 1500lt/hour
57m – 1800lt/hour
56m – 2000lt/hour
50m – 2500lt/hour
42m – 3000lt/hour
32m – 3500lt/hourSOLD OUTCRI 0.75kW 70m Borehole Pump Kit – 230V
The Kit Consists of the following:
Pump & Motor 0.75kW
Control Box 0.75kW
Safety Rope – 70m
Cable – 70m
Base PlateWill deliver as follows:
93m – 1000lt/hour
89m – 1500lt/hour
86m – 1800lt/hour
83m – 2000lt/hour
73m – 2500lt/hour
62m – 3000lt/hour
47m – 3500lt/hour Europe Vertical Pressure Tank Stainless Steel 8L
304 Vertical stainless steel 8l tank, 12 bar maximum pressure with EPDM membrane, 25mm BSP connection.
Installed with the pump to control the water under pressure for automatic pressure systems.Ford Petrol Water Pump – 2″
Displacement: 208 cc
Engine Type: Single cylinder, 4-stroke, OHV, Air cooled
Power: 4.3 kW/3600 rpm
Total Head: 32 m
Suction: 7 m
Section Port Diameter: 50 mm
Discharge Port Diameter: 50 mm
Discharge Capacity: 28 m3/h
Pump Type: Centrifugal, self-priming
Weight: 28 kg GeyserWise Circulation Pump 12V DC
The circulation pump is used to pump liquids in piped systems in particular water heating systems
Technical Specifications
Specification: 12V DC, Max 8Lpm, Max 2M, 7.5W
Soft start : 2W
Required Voltage scope : 7~17.7V,
Rated: 12VDC
System pressure: Operating = 600kpa, Tested = 3500kpa
Max continuous working liquid temperature : 90ºc
Max temperature/minimum period :100ºc
Flow rate : 2L/min to 10L/min
Noise: 35 DB (±10%)
Size: 91mm x 47mm x 96mm
Colour: Black with brass front end
GeyserWise Controller Max Kit
Use as timer on a thermosyhon solar system
Clear display of water temperature, time, day, heating mode and malfunction conditions on solar system and geyser.
Auto or manual heating.
Easy temperature setting to your requirements (30 – 65°C) factory default is 55°C.
Four different temperature settings.
Daily programmable timer with four time settings.
Error conditions alert by warning code E1 to E7.
Electronic thermostat with mechanical thermal cut-out at 90°C. Please note the cut-out temperature for solar systems expected to reach temperatures above this temperature.Use as timer and differential control on pumped solar system
Clear display of water temperature, time, day, heating mode and malfunction conditions on solar system and geyser.
Auto or manual heating.
Easy temperature setting to your requirements (30 – 65°C) factory default is 55°C.
Four different temperature settings.
Daily programmable timer with four time settings.
Error conditions alert by warning code E1 to E9.
Electronic thermostat with mechanical thermal cut-out at 90°C. Please note the cut-out temperature for systems expected to reach temperatures above this temperature.
Differential controller 12V and 220V systems.What’s included in the box?
Control box
Display unit
Water geyser sensor
Collector temperature sensor and extension
Water leak detector and extension
12V link cable
Screws
Alarm cable
GeyserWise Controller TSE Kit
Clear display of water temperature, time, day, heating mode and error conditions on solar system and geyser.
Auto or manual heating.
Easy temperature setting to your requirements (30 – 65°C) factory default is 55°C.
Four different temperature settings.
Daily programmable timer with four time settings.
Error conditions alert by warning code E2 to E5.
Electronic thermostat with mechanical thermal cut-out at 90°C.
Please note the cut-out temperature for solar systems expected to reach temperatures above this temperature.
GeyserWise Thermostat
This is a replacement thermostat (thermal cut out) for any GeyserWise controller.
JohnTech 0.37kW Borehole / Submersible Pump Kit – 230V
Whats in the box:
0.37kW Pump, Motor & Control Box
40m Cable
40m Safety Rope
Base PlatePump delivery:
35m – 50ltr/min
54m – 30ltr/min
63m – 10ltr/min JohnTech 0.55kW Borehole / Submersible Pump Kit – 230V
Whats in the box:
0.55kW Pump, Motor & Control Box
50m Cable
50m Safety Rope
Base PlatePump delivery:
47m – 50ltr/min
72m – 30ltr/min
84m – 10ltr/min JohnTech 0.75kW Borehole / Submersible Pump Kit – 230V
Whats in the box:
0.75kW Pump, Motor & Control Box
60m Cable
60m Safety Rope
Base PlatePump delivery:
59m – 50ltr/min
90m – 30ltr/min
105m – 10ltr/minKaufmann LED Rechargeable Spotlight T600
Super bright 600 lumens of light delivers outstanding night time visibility up to 500m.
Ergonomic pistol grip with rubber coating provides enhanced grip and comfort.
Trigger style on/off switch.
Over charge and discharge protection.
Includes: AC/DC adaptor [url]V0700106[/url] and DC 12v car charger [url]V0700105[/url].
Approx. 3.5 hours of continuous run time.
Ideal for hunting, fishing and outdoors.